Battery Tester

Product Details:

- Detects R-134a, R-404A, Freon R-407C, R-410A and R-22 (per EN 14624)
- High / low sensitivity per SAE J1627 rating criteria
- Audible and visual alarms
- Easy to use
- Tricolor LED indicator shows concentration of gas
- Sensor life: Approx. 1 year - see accessories for replacement

Product Details:

A study done by one of the largest battery distributor in USA has has shown that 40 % so called car’s failed battery could be used again by just doing process of charging and adding battery liquid. The only reason this battery were send to junk was most of technician still uses old method Load tester which does not give 100% accurate result. The most advanced and must test for battery check up is electronic conductance testing method.

LAUNCH BST-760 battery system tester uses the world’s most advanced conductance testing technology. LAUNCH BST-760 battery tester can measure very accurately cold cranking current to measure battery health. BST 760 can also test alternator (Generator) or car battery charging system and starter which help to improve battery life and hence improve efficiency.

BST 760 also comes with current measuring clamp which allows technicians to measure current without touching and cutting or removing insulation of wire. This removes chances of short circuit or a spark in the car. Current measuring clam can measure  current of range 0-900A AC and DC.

Product Application:

• LAUNCH BST-760 can be used for all most all battery manufacturing company like Exide, Amron, Bosch, Power Zone, TATA, Amco, Tudor and many more.
• LAUNCH BST-760 can be used for 6V and 12V battery testing and 12V and 24V alternator (Generator) or car battery charging system and starter testing.

Advantage of LAUNCH BST-760:

• Built - in thermal printer to print test result.
• Can store 100 groups of test results
• With ripple voltage test function
• Also test working of alternator (Generator) or car battery charging system and starter testing.
• Tests discharged batteries. No need to charge before testing.
• Lowest time to test battery (It takes about 3 second to test battery).
• The safest battery testing device and does not produce heat, spark and light means no risk for technicians and device.
• Dedicated Kelvin test clip
• Most accurate test results then load testing method.
• Automatic temperature compensation function
• Eight lines with backlight LCD display and humane language prompted interface.
• Multi- language menu display
• No user interpretation and meter required for result.
• Designed according to need of garage makes it a very user friendly

Specifications:

• Built-in thermal printe, the test results can be printed out at any time  
• Current measuring clamp: The configuration of the clamp is 0-900A AC and DC
• Can store 100 groups of test results data, ready at any time to view and print any of a group of test data

Product Details:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  

Product Details:

A study done by one of the largest battery distributor in USA has has shown that 40 % so called car’s failed battery could be used again by just doing process of charging and adding battery liquid. The only reason this battery were send to junk was most of technician still uses old method Load tester which does not give 100% accurate result. The most advanced and must test for battery check up is electronic conductance testing method.

LAUNCH BST-460 battery system tester uses the world’s most advanced conductance testing technology. LAUNCH BST-460 battery tester can measure very accurately cold cranking current to measure battery health. BST 460 can also test alternator (Generator) or car battery charging system and starter which help to improve battery life and hence improve efficiency.

Product Application:

• LAUNCH BST-460 can be used for all most all battery manufacturing company like Exide, Amron, Bosch, Power Zone, TATA, Amco, Tudor and many more.
• LAUNCH BST-460 can be used for 6V and 12V battery testing and 12V and 24V alternator (Generator) or car battery charging system and starter testing.

 
Advantage of LAUNCH BST-460

• With ripple voltage test function
• Also test working of alternator (Generator) or car battery charging system and starter testing.
• Tests discharged batteries. No need to charge before testing.
• Lowest time to test battery (It takes about 3 second to test battery).
• The safest battery testing device and does not produce heat, spark and light means no risk for technicians and device.
• Dedicated Kelvin test clip
• Most accurate test results then load testing method.
• Automatic temperature compensation function
• Eight lines with backlight LCD display and humane language prompted interface.
• Multi- language menu display
• No user interpretation and meter required for result.
• Designed according to need of garage makes it a very user friendly.